Skip to content 
SEWER PATCH REPAIR EXPERTS IN SAN ANTONIO, TEXAS
Trusted By:
Sewer Patch Repair in San Antonio, Texas | Drain Connection
What happens when your sewer line has one single crack, hole, or leaking joint, but the rest of the pipe is in good condition? In the past, the only option was an expensive excavation to dig up and replace that entire section. This meant destroying your yard to fix a small, isolated problem. There is now a much more intelligent and precise solution.
Drain Connection offers advanced Sewer Patch Repair—a cutting-edge trenchless method that allows us to fix a single point of failure from within the pipe. It’s a surgical, cost-effective repair that saves you the time, money, and headache of unnecessary digging. We service all of San Antonio, Texas, and the surrounding communities like Castle Hills, Alamo Heights, Stone Oak, and La Cantera.
You can explore resources like Plumbing Basics on HowStuffWorks
What is Sewer Patch Repair?
Sewer Patch Repair is a form of Cured-in-Place-Pipe (CIPP) technology, but on a smaller, more targeted scale. The process involves a section of fiberglass mat that is saturated in a special, high-strength epoxy resin. This patch is wrapped around an inflatable device called a “packer.”
Using a camera for guidance, the packer is navigated through your sewer line and positioned directly over the damaged area. The packer is then inflated, pressing the epoxy-soaked patch firmly against the inside of the pipe wall. After curing for a few hours, the packer is deflated and removed, leaving behind a new, rock-solid, and seamless section of pipe that is fully bonded to the host pipe.
Surgical Strike: When a Spot Repair is the Ideal Solution
A full pipe replacement or lining isn’t always necessary. A sewer patch repair is the perfect, targeted solution for fixing specific, localized problems, including:
- Sealing off unused or abandoned lateral connections.
- A single, isolated crack, hole, or puncture in a pipe.
- Leaking or separated pipe joints.
- Damage from a previous, improper drain cleaning attempt.
- Localized corrosion or root damage in an otherwise healthy pipe.
Why Replace the Pipe When You Can Repair the Problem?
This question gets to the heart of the value of a patch repair. By focusing only on the point of failure, you gain tremendous advantages:
A Permanent, Structural Fix: The cured epoxy patch isn’t just a seal—it’s a new, rock-solid piece of pipe that is corrosion-proof and designed to last for over 50 years.
Extremely Cost-Effective: A patch repair is significantly cheaper than relining the entire pipe or traditional excavation, making it the most affordable permanent repair option.
Targeted and Efficient: It uses a minimal amount of material and time by addressing only the damaged area, representing the ultimate in plumbing efficiency.
No Digging Required: Just like a full pipe lining, a patch repair is a trenchless method that saves your lawn, driveway, and landscaping from destruction.
Fast Installation: The entire process, from inspection to the final confirmation, can typically be completed in just a few hours.
Our Sewer Patch Repair Process: Precision From Start to Finish
Step 1: Inspection and Cleaning: We first perform a camera inspection to pinpoint the exact location and size of the damage, then use our hydro jetting equipment to thoroughly clean the pipe section.
Step 2: Prepare the Patch: We cut a fiberglass patch to the precise size needed and saturate it with a two-part epoxy resin.
Step 3: Position the Patch: The prepared patch is wrapped around a deflated packer. Guided by a camera, this assembly is inserted into the pipe and positioned exactly over the damaged area.
Step 4: Inflate and Cure: The packer is inflated with air, pressing the patch firmly against the host pipe. It remains inflated for a few hours while the epoxy cures and hardens.
Step 5: Final Confirmation: We deflate and remove the packer, then conduct a final camera inspection to verify that the patch is perfectly sealed and bonded, leaving you with a permanent repair.
THE PRECISION FIX FOR DAMAGED SEWERS
Get in touch Today!
Why Choose Drain Connection? Your Trusted Texas Plumbing Partner
Licensed and Experienced Professionals: Our team consists of highly trained, licensed, and insured plumbers who are certified experts in modern trenchless repair technologies.
Cutting-Edge Technology: We invest in the latest patch repair systems and diagnostic cameras to provide a precise and permanent solution for your plumbing.
Upfront and Honest Pricing: We believe in transparency. You will always receive a clear, detailed estimate before any work begins, with no hidden fees or surprises.
Fast and Reliable Service: Our targeted patch repair process is incredibly efficient, allowing us to resolve your issue and restore service in just a few hours.
Customer Satisfaction Guaranteed: Your satisfaction is our top priority. We stand behind our work and are committed to ensuring you are completely happy with the service you receive.
Get a Targeted, Cost-Effective Sewer Repair
Why pay to replace an entire pipe when only a small section is broken? Choose the smart, surgical solution from Drain Connection and fix only what needs fixing.
Call us today to schedule a consultation and see if a Sewer Patch Repair is the right solution for you!
Frequently Asked Questions About Sewer Patch Repair in Texas
How strong is the repair patch?
It is incredibly strong. The patch is a structural repair, meaning it’s designed to be as strong, or even stronger, than the original pipe. It’s a permanent solution, not a temporary bandage.
What is the maximum length you can patch?
Standard patches are typically 2 to 4 feet long. This is ideal for covering most localized issues like cracks or bad joints. If damage extends beyond this, a full pipe lining might be a better option.
Is a sewer patch a permanent fix?
Yes. The materials used have a design life of 50+ years. It is considered a permanent, long-term solution that fully restores the integrity of the damaged section of pipe.
How do I know if I need a patch or a full pipe lining?
The initial camera inspection is the deciding factor. If our technician finds one or two specific problem areas but the rest of the pipe is in good shape, a patch repair is the most cost-effective solution. If the pipe has widespread cracking, corrosion, or multiple issues, a full lining would be recommended.
CHECK OUT OUR SPECIALS
